Power Off With Windows; Power Supply Module Ps694 With Battery - Toshiba 2000 User Manual

Chapter 3 Handling
3.1.3

Power Off with Windows

If a power supply is turned off without shutdown of Windows, the data in a hard disk is
destroyed and it may be unable to reboot.
Model 2000 is supporting the automatic shutdown of Windows, and the power supply
off-sequence. If the power supply module of exclusive use is used, the shutdown of
Windows can be performed without carrying out operation of a mouse and a keyboard.
Important
• In order to use an automatic shutdown function, the RAS support software installed
in C2 as standard is required.
3.1.4

Power Supply module PS694 with Battery

l
(1) An AC input power failure exceeding the preset allowable limit is detected as a
(2) Shutdown is requested to the C2 and the C2 starts shutdown processing.
(3) When the C2 finishes shutdown processing, the power module PS694 cuts
22
Power Supply Module PS694
Detect AC Failure
Main circuit
AC100/240V
Operation during power off
power failure. (Normal operation continues if power fails shorter than that.)
power off by stopping power supply from the battery.
Shutdown
Sequence
Battery
Control
Shutdown
Request
Power control signal
Main power for controller
C2
Windows
Shutdown
Request
RAS driver
Computer module C2PU37 User's Manual