Table of Contents
Advertisement
J8 and J9 (Universal Serial Bus 0 and 1 Connectors)
J8 (Port0) and J9 (Port1) are Universal Serial Bus (USB) Interface connectors (AMP 440260-
1). See the "J8 and J9 Universal Serial Bus 0 and 1 Connector Pinout" table below for pin
definitions.
USB Port 0 can be directed out J5 to an RPIO board. See cuttable trace option
CT58. USB Port 1 can be directed out J5 to an RPIO board. See cuttable trace option
and
CT32.
J8 and J9 Universal Serial Bus 0 and 1 Connector Pinout
Pin#
Function
1
Vcc (Fused)
2
DATA-
3
DATA+
4
GND
J10 (COM1 Serial Port)
J10 is an RJ-45 connector providing a front-panel COM1 interface. COM1 signals are also
directed out J5 to the backplane. See the "J10 COM1 Serial Port Pinout" table below for pin
definitions. SRI (Serial Ring Indicator) and SCD (Serial Carrier Detect) signals are not included
in the front panel RJ-45 connector.
Note: COM1 signals are available to the front- and rear-panel (at J5) simultaneously. Utilizing COM1 at
the front and rear at the same time will cause a signaling conflict.
J10 COM1 Serial Port Pinout
Pin#
Function
1
RTS
2
DRT
3
TXD
4
GND
5
GND
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Pin#
Function
6
RXD
7
DSR
8
CTS
-
SRI
-
SCD
A. Specifications
CT57 and
CT31
63
Advertisement
Table of Contents
