Use Of The Display And Encoder; Sections - RME Audio M-1610 Pro User Manual

3. Unpack the compressed file.
4. Open the  Settings in the Web Remote.
5. Within the Firmware Update section, press the Select .swu Firmware File button and locate the
unpacked file.
6. Press Start Firmware Update .

The unit retains all settings, including presets, when the firmware is upgraded.

2.3. Use of the Display and Encoder

The M-1610 Pro can be controlled directly at the unit. For this purpose, a display and an encoder provide
access to all features.
• Rotating the encoder when the standby screen is shown highlights one of four sections.
• Pushing the encoder when the screen is idle activates the previously active tab.
• Pushing the encoder when a section is highlighted opens the corresponding section.

2.3.1. Sections

All control items are categorized into four sections:
• STATE for general settings
• INPUT for audio input related settings
• OUTPUT for audio output related settings and routing
• CLOCK for digital clock related settings
To access the INPUT section:
1. Rotate the encoder to highlight the "STATE" section
2. Rotate the encoder to highlight the "INPUT" section
3. Push the encoder to open the "INPUT" section.
3 | 2.3. Use of the Display and Encoder
RME M-1610 Pro User's Guide