2.1. Firmware Update
New and improved features for this device, as well as bug fixes, are published on the RME website in the
download section as a firmware update. The update is provided as a compressed file with a .swu
extension and can be uploaded via web remote over USB or network.
To update the M-32 AD Pro II-D:
1. Connect the device by USB or network cable and open the Web Remote.
See: Section 8.5.1, "Finding the Device on a Network"
2. Download the current firmware from the RME website.
3. Unpack the compressed file.
4. Open the Settings in the Web Remote.
5. Within the Firmware Update section, press the Select .swu Firmware File button and locate the
unpacked file.
6. Press Start Firmware Update .
The unit retains all settings, including presets, when the firmware is upgraded.
2.2. Use of the Display and Encoder
The M-32 AD Pro II-D can be controlled directly at the unit. For this purpose, a display and an encoder
provide access to all features.
• Rotating the encoder when the standby screen is shown highlights one of four sections.
• Pushing the encoder when the screen is idle activates the previously active tab.
• Pushing the encoder when a section is highlighted opens the corresponding section.
2.2.1. Sections
All control items are categorized into four sections:
• STATE for general settings
• INPUT for audio input related settings
• OUTPUT for audio output related settings and routing
• CLOCK for digital clock related settings
RME M-32 AD Pro II-D User's Guide
2.1. Firmware Update | 3