Word Clock - RME Audio M-1610 Pro User Manual

• remote status/control with HTTP over IP routed networks.
The current link state is also shown on the display of the M-1610 Pro.
Two network port icons on the standby screen reveal the
following states:
Icon Description
No link - cable not connected
Negotiating link with other endpoint
Link with speed of 100 MBit/s (not
supported for audio streams)
Successful link with speed of 1 GBit/s

3.15. Word Clock

Word clock can be sent and received via 75 Ω coaxial cabling at the corresponding BNC connectors. The
cable length should not exceed 100 m (330 ft).
The input is terminated with 75 Ω internally. To pass on the word clock to other devices,

use the word clock output. Do not connect a T-adapter to the word clock input.
RME M-1610 Pro User's Guide
3.15. Word Clock | 14