Muting The Phones Output - RME Audio M-1610 Pro User Manual

To adjust the headphone volume on the device:
1. Press the PHONES Button above the headphone output.
2. Rotate the encoder to adjust the gain.
To separate the left and right headphone channels:
1. Open the phones configuration by pressing the PHONES button above the headphone output.
2. Confirm the current gain by pressing the encoder.
3. Rotate the encoder to navigate to "Mode" and press it.
4. Rotate the encoder and choose "Independent". The current Phones window is now dedicated to the
left Phones channel. Press the PHONES button again to open the right output channel.
Follow this procedure to join the two channels as a Stereo channel, reverting to "Linked" as the output
mode.
To adjust the phones output level:
1. Open the corresponding output channel strip.
2. Use the encoder to adjust the gain in the 'PHONES' channel strip.

Press the Shift key while dragging the knob for finer adjustments.

Clicking twice on the encoder knob opens a text field that can be used to input a value
using the keyboard.
To separate the left and right headphone channels:
1. Press the Button labeled "Stereo". The button turns grey and a second channel strip opens with its
own gain control.
Press the "Stereo" button again to create a stereo channel.
Any previously created gain offset between left and right channel will be ignored when

joining the channels to a stereo group.

10.2.4. Muting the Phones Output

To mute the phones output:
1. Press the PHONES button above the phones output.
2. Confirm the current output gain by pressing the encoder once.
3. Turn the encoder to highlight the MUTE button.
4. Press the mute button. It turns red to symbolize that the phones are muted.
RME M-1610 Pro User's Guide
10.2. Analog Outputs | 48