RME Audio M-1610 Pro User Manual page 37

To turn off illumination on the device:
1. Open the visual feedback tab in the STATE section.
2. Change any of the following:
a. Power to off to turn off the standby switch ring illumination.
b. Display to
To turn panel illumination back on:
1. Open the same menu and set the corresponding switches to

To turn the front panel lighting on temporarily, just rotate or push the encoder. The panel
will turn back off after five seconds.
RME M-1610 Pro User's Guide
off to turn off the display.
When any item is turned off, a notification (orange) is shown in the STATE
section.
to On.
8.4. Front Panel Illumination | 32