Table of Contents
Advertisement
On the display, a warning is signaled as an icon with a red bar:
To activate the warning on the device:
1. Open the power tab in the STATE section.
2. Toggle the switch Redundancy to On.
The warning signals only the current state.
To activate the warning on the web remote:
1. In the STATE section, activate the toggle next to Power Loss Warning.
8.2. Presets
Any change in the device configuration is persistent. After a power loss, the device will revert back to its
last state. Additionally, the M-1610 Pro can save fifteen states in presets numbered 1-15. After a preset
is loaded, any change in the configuration will result in an unsaved changes state.
The internal preset storage is not affected when the device firmware is updated to a newer
firmware version. Moreover, recalling the factory default preset does not delete any other
saved preset.
Settings that are not saved in a Preset
The following settings are not saved in a preset:
• Auto-lock
• Lock code
• Remote control
8.2.1. Saving Presets
Up to 15 presets can be saved in the internal storage of the M-1610 Pro.
27 | 8.2. Presets
RME M-1610 Pro User's Guide
Power loss at PSU 2
Representation of an unsaved preset on the device.
Advertisement
Table of Contents
