Ad Converter Specifications; Converter Specifications - RME Audio M-1610 Pro User Manual


When set to +24, analog inputs comply with RP 155:2014 - SMPTE Recommended
Practice.

3.11.1. AD Converter Specifications

Line In 1-16:
• Resolution: 24 bit
• Input level switchable per channel +24 dBu, +19 dBu, +13 dBu @ 0 dBFS
• Inputs AC coupled, fully symmetrical signal path (servo-balanced)
• Signal to Noise ratio (SNR) @ +24 dBu, 44.1 kHz: 117.0 dB RMS unweighted, 120.7 dBA
• Signal to Noise ratio (SNR) @ +19 dBu: 116.3 dB RMS unweighted, 119.9 dBA
• Signal to Noise ratio (SNR) @ +13 dBu: 114.7 dB RMS unweighted, 118.3 dBA
• Frequency response @ 44.1 kHz, -0.1 dB: 5 Hz – 20.5 kHz
• THD @ -1 dBFS: < -111 dB, < 0.00029%
• THD+N @ -1 dBFS: < -108 dB, < 0.00039 %
• Channel separation: > 110 dB
3.11.2. DA Converter Specifications
Line Out 1-8:
• Resolution: 24 bit
• Output level switchable per channel +24 dBu, +19 dBu, +13 dBu @ 0 dBFS
• Output level at TRS 1, 2 max. +19 dBu @ 0 dBFS
• Outputs DC coupled, fully symmetrical signal path ("truly balanced")
• Output impedance: 200 Ohm balanced, 100 Ohm unbalanced
• Signal to Noise ratio (SNR) @ +13/+19/+24: 116 dB RMS unweighted, 119 dBA
• Frequency response @ 44.1 kHz, -0.1 dB: 0 Hz – 22 kHz
• THD @ -1 dBFS: < -109 dB, < 0.00035 %
• THD+N @ -1 dBFS: < -107 dB, < 0.00043 %
• Channel separation: > 110 dB
11 | 3.11. Analog Line Levels
RME M-1610 Pro User's Guide