Unlocking The Device; Front Panel Illumination; Dark Mode - RME Audio M-1610 Pro User Manual

8.3.2. Unlocking the Device

To unlock the device temporarily:
1. Push and hold the encoder button for four seconds.
2. (if a code was set) Enter the code using the encoder and choose "Done".
The device will lock again after a timeout of one minute.
To unlock the device permanently:
1. Proceed as above, then
2. Open the lock tab in the STATE section
3. Deactivate the lock by toggling the switch to:
4. (optional) Move the encoder onto the lock code (if any), and push the encoder to delete it.
The device can only be locked and unlocked at the front panel. These controls are not accessible
remotely.

8.4. Front Panel Illumination

The M-1610 Pro front panel consistst of:
• A ring illumination around the standby switch that shows the overall state of the device.
• A display with standby screen that shows categorized warnings.
They have been designed to give the user thorough status feedback even from a distance. Each of the
three sections can be individually switched off (dark mode).

8.4.1. Dark Mode

Each of the three front panel illumination sections can be switched off if they are not required.
31 | 8.4. Front Panel Illumination
RME M-1610 Pro User's Guide
OFF