Table of Contents
Advertisement
Loading a preset cannot be undone. Ensure that any important configuration has been
saved to another preset before proceeding.
The device name is part of the preset. When a preset is loaded, the device name is changed
to the value stored in the preset.
To load a preset using the web remote:
1. Locate the preset tab
2. Use the drop-down menu
3. Press the Load Button
8.2.3. Loading Factory Default Settings
The factory default settings are saved internally as Factory Preset and cannot be overwritten.
To load the factory defaults, load the 16th preset labelled Factory Preset.
Loading the factory defaults does not delete any saved presets. It also does not affect the
lock settings in the STATE section.
8.3. Device Lock
The M-1610 Pro can be secured against both accidental and intentional changes to its configuration.
Locking the device, with or without code, protects against changes on the device itself. When locked, the
display shows a lock symbol.
The device lock does not protect against changes over network or MIDI remote control protocols. The
lock configuration is not stored within a preset.
A four to six digit code can be configured on the device. If this code is lost or forgotten, it is
not possible for the user to unlock the device. Contact your support for assistance.
8.3.1. Locking the Device
29 | 8.3. Device Lock
RME M-1610 Pro User's Guide
to select a preset.
.
Advertisement
Table of Contents
