Loading Factory Default Settings; Device Lock; Locking The Device - RME Audio M-32 AD Pro II-D User Manual

1. Open the preset tab in the STATE section (see: Section 2.2, "Use of the Display and Encoder").
2. Move the cursor to the current preset number and push the encoder.
3. Rotate the encoder to choose a preset, and confirm by pushing the encoder.
4. Select Load to load the preset.
To load a preset using the web remote:
1. Locate the preset tab
2. Use the drop-down menu
3. Press the Load Button

8.2.3. Loading Factory Default Settings

The factory default settings are saved internally as Factory Preset and cannot be overwritten.
To load the factory defaults, load the 16th preset labelled Factory Preset.
Loading the factory defaults does not delete any saved presets. It also does not affect the

lock settings in the STATE section.

8.3. Device Lock

The M-32 AD Pro II-D can be secured against both accidental and intentional changes to its
configuration. Locking the device, with or without code, protects against changes on the device itself.
When locked, the display shows a lock symbol.
The device lock does not protect against changes via remote control. The lock configuration is not
stored within a preset.
A four to six digit code can be configured on the device. If this code is lost or forgotten, it is

not possible for the user to unlock the device. Contact your support for assistance.

8.3.1. Locking the Device

In order to lock the device, proceed with the following steps:
26 | 8.3. Device Lock
RME M-32 AD Pro II-D User's Guide
to select a preset.
.