Loading Factory Default Settings; Device Lock; Locking The Device - RME Audio AVB Tool User Manual

Half-rack madi-avb converter with outstanding analog connectivity

Hide thumbs Also See for AVB Tool:

Table of Contents

8.1.3. Loading Factory Default Settings

The factory default settings are saved internally as Factory Preset and cannot be overwritten.

To load the factory defaults, load the 16th preset labelled Factory Preset.

Loading the factory defaults does not delete any saved presets. It also does not affect the



lock settings in the STATE section.

The AVB Tool can be secured against both accidental and intentional changes to its configuration.

Locking the device, with or without code, protects against changes on the device itself. When locked, the

display shows a lock symbol.

The device lock does not protect against changes over network or MIDI remote control protocols. The

lock configuration is not stored within a preset.

A four to six digit code can be configured on the device. If this code is lost or forgotten, it is



not possible for the user to unlock the device. Contact your support for assistance.

RME AVB Tool User's Guide

8.2. Device Lock | 30

Table of Contents