C
4
HAPTER
INSTALL THE NODE HARNESS
FIGURE 6. Node Harness Installed on the Node
1. Install the two large, rectangular connectors of the node harness (P/N 115-4001-165) into the correct ports of
the node, tightening the bolts on the harness connectors to secure the connections.
2. Locate the 2-pin ENABLE connector on the node harness (P/N 115-4001-145) and connect it to the foot switch
connector (if applicable).
FIGURE 7. 6-Pin Deutsch Connector on Node Harness
3. Connect the unlabeled 6-pin Deutsch connector to the mating connector on the machine's harness.
24
Buhler Versatile 350-550, Tier IV (2012 & Newer) SmarTrax™ Installation Manual