Raven SmarTrax Installation Manual page 31

1. Connect the bulkhead connector on the valve harness (P/N 115-4001-145) to the mating connector on the node
harness (P/N 115-4001-165) installed on the machine under the cab.
2. Route the valve harness toward the SmarTrax valve (P/N 334-0003-089).
FIGURE 13. TRANSDUCER Connection
3. Connect the TRANSDUCER connector to the pressure transducer (P/N 422-0000-086) installed in Port PS of the
SmarTrax valve.
FIGURE 14. VALVE Connection
4. Connect the VALVE connector to the open 4-pin Deutsch port in the SmarTrax valve.
Manual No. 016-5031-006 Rev. B
CAB COMPONENT INSTALLATION
27