Accuboom™ Node Installation - Raven AccuBoom Installation Manual
Case ih spx 3150, (’03 & older) 3185 & 3200, 3200b, & (’00 & older) 4260 patriot cabs with can product control, with or without aim command
Hide thumbs
Also See for AccuBoom:
- Installation manual (26 pages) ,
- Calibration & operation manual (24 pages) ,
- Parallel installation manual (16 pages)
Table of Contents
Advertisement
Chapter 2
Route the individual boom section connectors from the center rack to the appropriate boom section
3.
valves.
Note:
Route the AccuBoom™ Control Cable away from moving components to avoid pinching or
breaking the cable during machine operation and to allow folding or unfolding the booms.
Connect the AccuBoom™ Control Cable (P/N 115-1001-036):
4.
Disconnect the existing cable connection from the machine's boom section valve.
a.
Remove the dust caps from the AccuBoom™ Control Cable connectors and insert existing
b.
cable connectors to the appropriate section connector.
Insert the AccuBoom™ Control Cable connectors to the machine's boom valves.
c.
AccuBoom™ Node Installation
Select a location on the machine's center rack to mount the AccuBoom™ CAN Control Node (P/N
1.
063-0172-316). When selecting a mounting location, keep the following in mind:
Length and routing of the AccuBoom™ Control Cable. Mounting the node toward the right side
a.
of the center rack provides for convenient routing to the vehicle cab.
Keep the cable away from moving components to avoid pinching or breaking the cable during
b.
machine operation due to rack movement.
Node must be mounted with the rectangular connectors pointing toward the ground to avoid
c.
collecting moisture or debris.
Node should not be subjected to heavy pressure washing. Select a location away from sprayer
d.
components which may require direct pressure washing.
Mount the AccuBoom™ Control Node securely to the machine's center rack.
2.
AccuBoom™ Node Power
Insert the large rectangular connectors on the AccuBoom™ Control Cable (P/N 115-1001-036) to
1.
the AccuBoom™ CAN Control Node (P/N 063-0172-316).
4
Case IH SPX 3150, ('03 & Older) 3185 & 3200, 3200B, & ('00 & Older) 4260
Do not reverse the battery leads. Doing so will
cause severe damage to the electrical
equipment. Read and follow installation
instructions carefully when connecting lead
wires to the battery.
Patriot Cabs with CAN Product Control, w/wo AIM Command
CAUTION
Advertisement
Table of Contents
