Setting The Supply Position; Setting The Print Position - Avery Dennison Monarch 9419 Administrator's Manual

S e t t i n g t h e S u p p l y P o s i t i o n
This function adjusts the position of the supply relative to the index marks in the feed
direction. Adjust the supply position to compensate for supply variation. The
adjustments are in dots where one dot equals 0.0049 inch. The default is 0.
Select To
Navigation Selects positive or negative and which position to change.
button:  or 
Navigation Increase or decrease the supply position to move the print up or down.
button:  or 
S e t t i n g t h e P r i n t P o s i t i o n
This function adjusts the image's position on the supply in the feed direction. Adjust the
print position if the print is too close to the top or bottom of the supply, or overtypes the
pre-printed area. The adjustments are in dots where one dot equals 0.0049 inch. The
default is 0.
Select To
Navigation Selects positive or negative and which position to change.
button:  or 
Navigation Increase or decrease the print position to move the print up or down.
button:  or 
Classification: Avery Dennison - Public Configuring the Printer 2-3