Setting the Margin Adjust
Use this option to adjust where the format prints horizontally on the
supply. The range is between -99 to 99. The default is 0.
1.
From the Printer menu, select Margin Adj.
Margin Adjust
+00
↵
Use A as shown in the following table:
↵
Press A to
Enter
Save the setting
When the setting you want is displayed, press A under ↵ to save the
2.
setting. You return to the Printer menu.
3-10 System Administrator's Guide
+
Press A to
Set the position (+00)
1 st position
2 nd position
3 rd position
+
Press A to
Toggle between
positive and negative
Increase the setting
by 10
Increase the setting by 1