Table of Contents
Advertisement
U s i n g F o n t s w i t h t h e 6 0 5 7 P r i n t e r
This section is not applicable to the 6140 printer. See
for more information.
The printer uses standard Windows fonts; however, additional fonts can be downloaded to the
printer. See
"Installing
Using Non-Resident Fonts
Within your application, instantiate a new Print class such as rPrint and call a method such as
Print to load the non-resident.
Installing Fonts
Follow these steps to install additional Windows fonts to the printer:
Make sure the printer is connected via USB and start an Active Sync session.
1.
2.
Open the \WINDOWS\Fonts folder on your computer.
Drag the TrueType® font file (.TTF) from your computer to the Temp\Install folder on the
3.
Mobile Device (printer).
Note:
Check the \Windows\Resources\Fonts folder on the Mobile Device (printer) to
make sure the file installed correctly. Do not save files directly to this folder.
Reference the font's filename in the LNT file. See
4.
more information about creating a text field with an installed font.
Note:
The printer's software (version 2.0 or higher) supports International
(double-byte) fonts. An International TrueType font containing Chinese or Japanese
characters may be very large. Make sure the printer has enough memory before
installing the font.
E r r o r R e p o r t i n g w i t h t h e 6 0 5 7 P r i n t e r
This section is not applicable to the 6140 printer. Refer to the Software Development Kit
(SDK) for more information.
During normal printer operation or while testing a LNT file, you may receive an error message.
When an error occurs, a message appears briefly on the display "Press home key to clear the
printer error" and a small stop sign icon appears in the Task Bar.
Press the Home key to show the error message. For example:
1.
1-6 LNT Programmer's Manual
Fonts" for more information.
Parser Error
ID:BOX1, BoxField:LineThickness
"Transferring Files to the 6140
"Defining the Font Tag
Printer"
(Optional)" for
Hide quick links:
Advertisement
Table of Contents
