Honeywell Home T10 Pro RedLINK Manual page 26

T10 PRO SMART THERMOSTAT WITH REDLINK
Installer Setup
ISU # Name
9210 Dehumidifi-
cation Filter
Replacement
Reminder
10000 Ventilation
Type
10050 Ventilation
Control Method
10060 Ventilation Fan
Control
10090 Number of
Bedrooms
10090 Size of house
10100 Enter Equipment
Ventilation Rate
33-00462—01
Table 5. Installer Setup (ISU)
Settings
Off, 30, 60, Calendar Off
Days 3 to 12 Calendar
Months (in 1 month
increments)
• None None
• ERV/HRV
• Passive (Fan Only)
• Fresh Air Damper
• ASHRAE Ashrae
• Percent on Time
• Thermostat Thermostat
Controls Fan Controls Fan
• Equipment Controls
Fan
if "fresh air damper" or
"passive" is selected for
ISU 10,000. This
setting is not shown
and thermostat
controls fan by default
1 to 6 2
1000 to 5000 sq. ft. (in 1000 sq. ft.
100 sq. ft. increments)
(90 to 460 sq. m.)
30 to 350 CFM (in 5 150 CFM
CFM increments)
(850 - 9900 LPM)
26
Default
None: The thermostat does not control
ventilation.
ERV/HRV: The thermostat controls an
Energy Recovery Ventilator or Heat
Recovery Ventilator for ventilation.
Passive (Fan Only): The thermostat only
turns on the fan for ventilation. This
assumes the system has a damper that
automatically opens whenever the fan runs.
Fresh Air Damper: The thermostat turns on
the fan and opens a fresh air damper for
ventilation.
See "Ventilation Control Methods (ISU
10050)" on page 35.
Thermostat Controls Fan: The thermostat
turns on the ventilation equipment and the
fan when ventilation is needed.
Equipment Controls Fan: The thermostat
turns on the ventilation equipment when
ventilation is needed. The fan is controlled
by the equipment.
This ISU is only displayed when ISU10050
Ventilation Control Method is set to
ASHRAE.
This ISU is only displayed when ISU10050
Ventilation Control Method is set to
ASHRAE.
This ISU is only displayed when ISU10050
Ventilation Control Method is set to ASHRAE
(Residential only). This is the CFM rating of
the ventilation equipment.
Notes