Honeywell Home T10 Pro RedLINK Manual page 23

Installer Setup
ISU # Name
4110 Keypad Lockout • Unlocked
5000 Is an indoor
sensor WIRED
to your System?
5030 Indoor
temperature
sensor type
5040 Which Sensors
will be used for
Temperature
Control?
(Multiple
sensors are
averaged)
7000 Filter Type
7020 Number of air
filters
7110 Air filter 1
replacement
reminder
7110 Air filter 2
replacement
reminder
8000 What type of
humidifier do
you have?
Table 5. Installer Setup (ISU)
Settings
Unlocked
• Partially locked
• Fully locked
Indoor air temperature Unchecked box
(no indoor
sensor used)
10K 10K
20K
Thermostat Both
Remote Sensor
• None None
• Media
0-2 1
Off Off
Run Time:
10, 20, 30 45, 60, 90,
120, 150 days
Calendar:
30, 45, 60, 75 days
3, 4, 5, 6, 9, 12, 15
months
Off Off
Run Time:
10, 20, 30 45, 60, 90,
120, 150 days
Calendar:
30, 45, 60, 75 days
3, 4, 5, 6, 9, 12, 15
months
• None None
• Steam
• Bypass or fan
powered
23
T10 PRO SMART THERMOSTAT WITH REDLINK
Default
Unlocked: User has access to all thermostat
settings.
Partially Locked: User can modify only
temperature settings.
Fully Locked: User cannot modify any
settings
Select this if a wired indoor sensor is
connected to the S terminals.
Outdoor wired sensor can be selected at the
ISU prior to 2000 for "outdoor temperature".
* You cannot use both a wired outdoor and
wired indoor sensor, so if "outdoor
temperature" is set to wired sensor, ISU
5000 will not be shown.
Select 10K or 20K based on the sensor
installed. Refer to resistance values below:
C7189U1005 = 10K ohm
See "Installing Wired Indoor Sensor" on
page 14 for information wiring multiple
indoor sensors.
Select whether the internal thermostat
sensor or wired sensor(s) are used. If both
thermostat and remote sensor are selected,
the thermostat would count for 50% of the
average and all wired sensors combined
would count for the other 50% of the
average.
This setting does not pertain to the Wireless
indoor sensors. You can select which of
those are used for control temperature
under Menu-Priority from the home screen.
See "Installing Wired Indoor Sensor" on
page 15 for information wiring multiple
indoor sensors.
Only shown if ISU 7000 is set to media
Only shown if ISU 7020 is set to 1 or 2
Only shown if ISU 7020 is set to 2
Notes
33-00462—01