Metrohm 838 Advanced Sample Processor Manual page 90

3.8 Standard methods
82
2
3
30
31
58
59
86
87
Note: Although the first sample is placed on position 2, posi-tion 1
remains the starting position in the start sequence of the method at
the 838 (recording the "Intercept value").
Before each start, define the position of the first sample vessel. Press
the <SAMPLE> key of the 838 keypad and enter the rack position.
Find more information in the 8.797.8011 Software Manual of the 797 VA
Computrace, see section 8.6.
1
28
27
29
56
55
57
84
83
85
112
111
Metrohm 838 Advanced Sample Processor, Appendix
Intercept solution
Sample
Rinsing solution
not used