Instrument Dialog - Metrohm 838 Advanced Sample Processor Manual

2.1.4

Instrument dialog

Main menu
Submenu
Input lines
Metrohm 838 Advanced Sample Processor, Operation
The instrument dialog of the Advanced Sample Processors is arranged
in menu levels in which the following rules apply:
The <CONFIG>, <PARAM> and <USER METHOD> keys of the
Sample Processor open a main menu whose thematically arranged
submenus are accessed by repeatedly pressing this key or with < >.
The name of the main menu appears in the first line.
Each submenu has its own title which is indicated by
in the lower line of the display. From the title you can use <ENTER> to
access the individual questions with which the most important instru-
ment settings can be altered. The first line of the display always shows
the name of the active submenu.
Navigation in the menus is by the cursor keys; with <HOME> you can
access the first line of the menu and with <END> the last one.
<QUIT> exits the active menu and accesses either the next superior
menu or the normal operating condition.
<ENTER> always opens a submenu or confirms the data input of the
lowest menu level.
For input lines without
keys. The set value is accepted with <ENTER> and the next line ap-
pears.
For input lines with
<SELECT> key. <ENTER> accepts the set value and the next line
appears.
Depending on the parameter, <CLEAR> is used to set the initial value.
The <CLEAR> key is also used to reject incorrectly entered values.
<QUIT> exits the questions and returns to the submenu.
The following schematic diagram shows the instrument dialog ar-
rangement.
the values can be entered by the numerical
" "
:
predefined values can be selected with the
" "
:
2.1 Operating principles
> and appears
" "
11