Composition Of A Method; Run Sequences And Method Parameters - Metrohm 838 Advanced Sample Processor Manual

2.3 Composition of a method

2.3.1

Run sequences and method parameters

PARAM
parameters
number of samples:
parameters
>start sequence
parameters
>sample sequence
parameters
>final sequence
parameters
>changer settings
parameters
>stirring rate
parameters
>dosing unit def.
parameters
>timeout settings
parameters
>nanual stop
Submenus:
In each of the submenus
command lines can be entered as a run sequence. The commands can be entered directly via
the keypad. The command keys on the right-hand side of the keypad are available.
parameters
>start sequence
Metrohm 838 Advanced Sample Processor, Operation
All the settings of the parameter menu form a method and can be
stored as such.
Main menu:
Number of samples to be processed
rack
1...999, rack = one sample rack rotation
rack,∗ ∗ = infinite
In the setting all the sample positions of the current rack will be
rack
processed (max. no. of rack positions minus number of special beak-
ers), with only the positions occupied by sample beakers being
counted. It is important that the Sample Processor can recognize the
rack. This is only possible when the rack is in initial position. We rec-
ommend that each time a rack is changed the Sample Processor is
initialized with <RACK>.
Open submenu with <ENTER>
Use < > or < > to move up and down by one menu
item
Use <HOME> or <END> to reach the first and last
menu item
Use <QUIT> to return to normal operating condition
,
>start sequence
Commands for the start sequence of the sample series
The start sequence is carried out once at the start of a sample series.
and
>sample sequence
Open the submenu with <ENTER>
2.3 Composition of a method
up to 99
>final sequence
25