Manual Stop Options - Metrohm 838 Advanced Sample Processor Manual

2.3.6

Manual stop options

parameters
>manual stop options
>manual stop
CTL Rmt:
Connected peripheral devices can be stopped automatically. The 14 signal
lines of the Remote interface can be set as required, see also p. 68ff.
>manual stop
CTL RS232:
Connected peripheral devices (e.g. Metrohm devices) can be stopped
automatically. Any character string can be transmitted. For details of the se-
rial RS232 interface see "Technical Reference".
>manual stop
PERISTALT:
>manual stop
PUMP:
This setting applies to both pump connectors.
>manual stop
STIR T1:
>manual stop
STIR MSB1:
>manual stop
STIR MSB2:
>manual stop
STIR MSB3:
Metrohm 838 Advanced Sample Processor, Operation
The following settings can make a great contribution to the comfortable
operation of the Sample Processor. A definition is made of what is to
happen when the <STOP> key is pressed. This could be a normal
manual cancellation of a running method, or an emergency stop of the
complete system. Depending on the arrangement of the automated
system and the type of application, it can be laid down in detail how the
individual instrument components and connected instruments are to
react when the <STOP> key is pressed.
**************
14 bit (1,0 or ∗)
14 ASCII characters
cont.
cont., off, on
cont.
cont., off, on
cont.
cont., off, on
cont.
cont., off, on
cont.
cont., off, on
cont.
cont., off, on
2.3 Composition of a method
Submenu for reaction after manual stop
Open the submenu with <ENTER>
Set signal lines of the Remote interface
Command or character string, for output
via the RS232 interface
default value '&M;$S' (= stops a Metrohm device)
Switches the peristaltic pump
(cont. = retain condition)
Switches the pump connectors
(cont. = retain condition)
Switches the stirrer at the tower
(cont. = retain condition)
Switches the stirrer at MSB connection 1
(cont. = retain condition)
Switches the stirrer at MSB connection 2
(cont. = retain condition)
Switches the stirrer at MSB connection 3
(cont. = retain condition)
31