Dosing Device Control; Display Interface Signals - Metrohm 838 Advanced Sample Processor Manual

2.7.6

Dosing device control

DOS
6
2.7.7

Display interface signals

SCAN
1
Metrohm 838 Advanced Sample Processor, Operation
With the STIR command all of the connected stirrers can be con-
trolled. The first parameter selects the stirrer. In addition to switching
on and off, the stirring time can be chosen (in seconds).
manual operation
DOS: 1.* : :
1.1...3.4,
1.*...3.*, *.*
fill,release, prep
empty, eject, endVol,
compen., port,
The DOS command is used for controlling Dosimats and Dosinos.
The 1st parameter selects the dosing device and the corresponding
dosing port, at which the required function is to be carried out. In
addition to the dosing volume, several dosing functions can be cho-
sen. For details, see section 2.4.3.
manual operation
SCN:Rm :00000000
Rm,RS
The command causes the signal states of the incoming re-
SCN:Rm
mote lines to be displayed in binary format (
inactive).
manual operation
SCN:RS
Rm,RS
characters
The command causes the character string received at the
SCN:RS
RS232 interface to be displayed line by line (14 characters).
Dosing functions
1 mL
Display remote interface
signals
0,1
Display RS232 interface sig-
nals
ASCII
2.7 Manual operation
= line active, = line
1 0
51