Metrohm 838 Advanced Sample Processor Manual page 66

2.8 Dosing and liquid handling
Eject
Endvolume
Compensate
58
DOS: X.Y : eject mL
The cylinder are completely ejected via the given port. The piston
moves down to the stop. If * is entered as a wild card then the port
given under
>dosing drive
dosing
will be used (default: Port 1).
DOS: X.Y : endVol mL
The content of the dosing cylinder is ejected via the given port. The pis-
ton is run the nominal volume. If * is entered as a wild card then the
port given under
>dosing drive
dosing
will be used (default: Port 1).
DOS: X.Y : compen. mL
The mechanical play between the dosing piston and drive spindle is
eliminated after the stopcock has been rotated to the given port. If * is
entered as a wild card then the port given under
>dosing drive
dosing
will be used (default: Port 1).
Ejects the complete dosing cylinder con-
tents
X
port Y
Ejects the cylinder volume to the max. vol-
ume mark
X
port Y
Eliminates the mechanical play
X
port Y
Metrohm 838 Advanced Sample Processor, Operation