Metrohm 838 Advanced Sample Processor Manual page 25

The run sequences of the Sample Processor will be stopped when input
line 6 is activated (low level). The technical details can be found in the
8.789.1033 Technical Reference of the Sample Processors.
>auxiliaries
>>running time meter
Shows the elapsed time
Warning limit for running time
meter
The running time meter is used to support the regular mainte-
nance of the Sample Processor. If a warning limit is entered then,
when this period has elapsed, a message will appear indicating
that maintenance is required.
>auxiliaries
device label
>auxiliaries
program
Metrohm 838 Advanced Sample Processor, Operation
8 ASCII characters
5.838.0012
read only
Submenu for running time meter, open
with <ENTER>
>>running time meter
elapsed time
>>running time meter
warning
OFF, 0...9999 hours
Name of the instrument
for identification
Program version
2.2 Configuration
0.0 h
0...9999 h
OFF h
17