Metrohm 838 Advanced Sample Processor Manual page 75

Special beakers
Metrohm 838 Advanced Sample Processor, Appendix
Special beakers are reserved positions on a sample rack. Up to 16
special beaker positions can be defined per rack. They can be selec-
tively moved to during a run sequence without interrupting the sample
series run or interfering with it. Special beakers can be used for rinsing
the electrode during a sample sequence or for calibrating an electrode
in a start sequence (buffer solutions), etc.
Reserved special beaker positions are automatically recognized in a run
sequence and are skipped over when the individual sample beakers
themselves are being processed.
Special beakers are moved to with
The following settings can be made separately for each special beaker
position on a rack:
•
Rack position
•
Working height at Tower 1
•
Working height at Tower 2
•
Beaker radius
•
Beaker sensor
If a special beaker is required in a run sequence, but the Sample Proc-
essor cannot find a beaker at the reserved position, then an error mes-
sage will always appear.
.
MOVE 1 : spec.1
3.1 Sample racks
67