Product User Documentation - Deif IMD 100 Series Integration Manual

IMD 100 Integration manual 4189360015 Rev. G

15. Product user documentation

The IMD product has an extensive user documentation, targeted towards different audience and
product use stages.
The following documents are part of the user documentation:
Table 44 IMD user documentation
Document
IMD 100 datasheet
Document no.:
4921260015
IMD 100 function
description
Document no.:
4189360013
IMD 100 integration
manual
Document no.:
4189360015
IMD Manager
installation
instructions
Document no.:
4189360018
IMD Manager user
manual
Document no.:
4189360019
IMD 100 installation
instructions
Document no.:
4189360005
IMD 100 initial
configuration and
verification manual
Document no.:
4189360016
IMD 100 service and
maintenance manual
Document no.:
4189360017
IMD 100 installation
checklist
Document no.:
4189360021
www.deif.com/wind-power
Target audience
Buyers and technicians of
customers
Mainly technicians and
engineers of customers.
Engineers at customer
R&D department
Engineers at customer
R&D department, as well
as commissioners and
service personnel
Engineers at customer
R&D department, as well
as commissioners and
service personnel
Technicians at production
site where the IMD is
mounted in the cabinet/hub
Commissioners or other
personnel with similar
qualifications, as well as
service personnel (for SW
upgrade)
Service and warehouse
personnel
Technicians at production
site where the IMD is
mounted in the cabinet/hub
Content
Describes relevant specifications and give an overview
of the IMD functions
Describes the functions of the IMD. Gives the reader an
understanding of the purpose of the IMD in a system,
and which functions can be utilised in a pitch system.
The functions are described so that the reader can
understand what each function is used for.
Describes how to integrate the IMD in a pitch system.
Gives extensive knowledge about:
IMD SW (parameters and how to achieve specific
functionality)
How to create customized parameter file for use in
production
Requirements for external interfaces/components
Describes how to install the IMD Manager.
The IMD Manager is an application used to configure
and control the IMD using the Service USB connector.
Describes how to use the IMD Manager.
The IMD Manager is an application used to configure
and control the IMD using the Service USB connector.
Describes how to mount, connect and perform initial
start, test, and configuration (using a configuration file)
of the IMD at production.
Describes how to upgrade the IMD SW, how to load
configuration file, and how to verify the IMD installation
to the possible extent.
Describes preventive (scheduled) and corrective
maintenance of the IMD, as well as storage
requirements.
Installation tasks with check boxes to document the
tasks done during installation
Product user documentation
Page 239 of 243