Digital Inputs - Deif IMD 100 Series Integration Manual

IMD 100 Integration manual 4189360015 Rev. G
9.17.1.4 Deactivation
IMD Manager: Click on the "DO x" button of the digital output to toggle it:
CAN/CANopen: Reset the applicable bit in object 2098 (see section
mapping) to "0" (Off).

9.17.2 Digital inputs

This section describes how to use the digital inputs.
9.17.2.1 Prerequisites
None
9.17.2.2 Activation
None
9.17.2.3 Operation
IMD Manager: The state of all digital inputs is represented by LED in the "Monitor and control" tab.
The LED is turned ON when the input is high, and Off when the input is low.
www.deif.com/wind-power
Operational procedures
13.2.8 on page 207 for bit
Page 166 of 243