Accessories; Control Box; Figure 61: Control Box (Ordering No: 985330031) - Datalogic VLASE IR 1PWX-TLS2 User Manual

6

6 ACCESSORIES

The accessories listed here below are described for information purposes only, and are not necessarily
included in the packaging. The minimum contents of the packaging include the main hardware, cables and
keys. For additional information, please refer to paragraph 1.2.

6.1 CONTROL BOX

Control and command device able to manage:
•
System warmup
•
Opening the Shutter and enabling laser emission
•
Starting and Stopping the marking process
•
Showing the marking process status
•
Showing the system error status
Key selector
1
Selector switch for EXT_KEY control signal
Enable selector / ENABLE indicator
2
Selector switch for both EXT_ENABLE_A and EXT_ENABLE_B control signals with LED indicator
for ENABLE_OUT control signal
Alarm indicator
3
LED indicator for SYSTEM_ALARM control signal
Start button / BUSY indicator
4
Pushbutton for START_MARKING control signal with LED indicator for BUSY control signal
Stop button / END indicator
5
Pushbutton for STOP_MARKING control signal with LED indicator for END control signal
READY indicator
6
LED indicator for SW_READY control signal
External connector
7
Connection to Command Box connector
* Refer to Command Box connector (see paragraph 2.4.3) for detailed control signal descriptions.
WARNING!
If the Control Box is used, the marking system works in DANGEROUS condition.
76

Figure 61: Control Box (Ordering no: 985330031).

TM
VLASE IR