Figure 39: Connecting The Optical Fiber To Resonator; Figure 40: Final Closing - Datalogic VLASE IR 1PWX-TLS2 User Manual

INSTALLATION AND SET UP
3) remove the protection cap and insert the optical fiber in the resonator, being careful not to soil or scratch
the fiber end.
4) screw the metallic cover and cable gland onto the resonator.
WARNING!
To avoid damaging or breaking the optical fiber, never subject it to a bending radius smaller than 20
cm.

Figure 39: Connecting the optical fiber to resonator.

Figure 40: Final closing.

3
41