Connecting The Optical Fiber On The Resonator; Figure 37: Disassembling The Optical Fiber Cable Gland From The Resonator; Figure 38: Passing The Optical Fiber Through The Cable Gland - Datalogic VLASE IR 1PWX-TLS2 User Manual

3

3.1.5 CONNECTING THE OPTICAL FIBER ON THE RESONATOR

Follow the steps listed here below to wire the optical fiber to the resonator:
1) unscrew the three screws that secure the metallic cover and cable gland to the resonator.

Figure 37: Disassembling the optical fiber cable gland from the resonator.

2) insert the optical fiber through the cable gland without removing the protection cap.
WARNING!
The insertion of the optical fiber is a delicate operation. You must make sure that the optical fiber is
protected by its cap during insertion through the cable gland to avoid damaging or dirtying it.

Figure 38: Passing the optical fiber through the cable gland.

40
TM
VLASE IR