Remote Mode Connection; Figure 51: Vga Monitor Connection; Figure 52: Rj45 Ethernet Connection - Datalogic VLASE IR 1PWX-TLS2 User Manual

3
NOTE:
Minimum resolution 800 x 600.

3.1.13 REMOTE MODE CONNECTION

To use the marking system in "Remote Mode" it is necessary to connect a network cable:
NOTE:
The system LAN is configured by default with a fixed IP Address and Subnet Mask:
- Default IP address: 192.168.0.10
- Default Subnet Mask: 255.255.255.0
See paragraph 5.2 in order to change LAN configuration.
NOTE:
Ethernet TCP/IP 10, 100 Mbit.
48

Figure 51: VGA monitor connection.

Figure 52: RJ45 Ethernet connection.

TM
VLASE IR