Installation And Set Up; Connections; Connecting Command Box Cable; Figure 28: Connecting Command Box Cable - Datalogic VLASE IR 1PWX-TLS2 User Manual

INSTALLATION AND SET UP

3 INSTALLATION AND SET UP

3.1 CONNECTIONS

This section of the manual describes the marking system wiring. Carry out the connecting operations as
described below.
WARNING!
Connect the components of the marking system together WITHOUT voltage in order to avoid risks to
the operator and to the marking system.

3.1.1 CONNECTING COMMAND BOX CABLE

NOTE:
The Command Box cable must always be inserted in order to use Enable and Key on the front panel
of the rack.

Figure 28: Connecting Command Box cable.

3
35