4
4.4.3 HOW TO USE EXTERNAL SIGNALS TO ENGRAVE YOUR DOCUMENT
Automate the marking process allowing documents to be marked using external START_MARKING and
STOP_MARKING signals, which can be generated by PLC or other external devices.
Click on the Save to Device button to save the layout in the marking system memory:
Click on the Show Laser Engine button to display Laser Engine window:
AUTO/MANUAL Mode button allows switching between the two available working modes:
o
Auto mode: the engraving operations are executed automatically using external signals.
o
Manual mode: used for displaying the margins of the graphic objects to be marked and to test
layouts.
62
TM
VLASE
IR