Stopping The Dryer In An Emergency - Conair Carousel Plus D Series User Manual

OFF
O
IMPORTANT: Except in an
emergency, aways wait until
the dryer control displays
"Standby" in the status dis-
play before turning the rotary
disconnect to the OFF posi-
tion. Failure to do so will not
allow the dryer to progress
through the cooldown proce-
dure and could result in dam-
age to your equipment.
4 - 5 6 l O p e r a t i o n
S t o p p i n g t h e D r y e r i n a n e m e r g e n c y
To stop the dryer in an emergency:
1
Rotate the rotary disconnect to the OFF position. Power will be immediately discon-
nected from the control and the dryer.
2
If using your dryer as part of a ResinWorks system, use
the disconnect on each hopper on the RW sled to discon-
nect the hopper heaters from power.
After shutting down for an emergency, an thorough inspection
of the dryer and drying system should be performed prior to
using the dryer, checking for damage to components due to the
dryer not properly shutting down.