Conair Carousel Plus D Series User Manual page 154

6 - 4 2 l Tr o u b l e s h o o t i n g
R e p l a c i n g t h e D e s i c c a n t W h e e l
( D 1 3 0 0 - 5 0 0 0 )
( c o n t i n u e d )
4
On the motor side of the wheel assembly, while noting the number of turns, relieve
the tension on the drive bolt by loosening the nut above the tension spring until the
belt can be slipped off the motor sprocket.
5
Remove the belt from the motor sprocket.
6
Move to the other side of the wheel assembly housing (the side without the motor).
Using the belt to pull, pull straight out on the wheel until it is free from the
housing.
(continued)