Unpacking The Boxes - Conair Carousel Plus D Series User Manual

0
NOTE: Depending on what
configuration you ordered,
your dryer may arrive with
flexible hose, or a hard piping
.
kit
Figure 1
Figure 3
3 - 2 l I n s t a l l a t i o n
U n p a c k i n g t h e B o x e s
The Carousel Plus D Series Dryer comes in one to four boxes, depending on the model and
options ordered. The box(es) could include (depending on the options selected):
•
Carousel Plus D Series Dryer
•
Delivery air hose or pipe
•
Return air hose or pipe
•
Heater Pack (not applicable with Central/ResinWorks Systems)
•
User Guide
1
Carefully remove the dryer and components from their shipping container(s). Note
that the dryer is secured to its shipping container with metal bands that pass through the
bottom of the dryer frame.
2
Unbolt any additional items secured to the shipping pallet, such as the regeneration
exhaust cover and return air adapter. (Carousel Plus D Series 1300-2400 Dryers will have
a dry air delivery adapter. Carousel Plus D Series 3200-5000 Dryers will have a dry air
delivery adapter.)
3
Remove all packing material, protective paper, tape, and plastic.
4
Cut and remove the desiccant wheel tie securing the wheel assembly.
.
1000)
5
Carefully inspect all components to make sure no damage occurred during shipping,
and that you have all the necessary hardware.
6
Take a moment to record serial numbers and electrical power specifications in the
blanks provided on the back of the User Guide's title page. The information will be help-
ful if you ever need service or parts.
7
You are now ready to begin installation.
Follow the preparation steps on the next page,
then choose one of the following mounting op-
tions:
•
Dryer on the floor, single hopper (with process
Heater Pack mounted to hopper) on a floor
stand. (See Figure 1.)
•
Dryer on the floor, mul-
tiple hoppers in central
configuration (Resin-
Works) with separate
heat source for each
hopper. (See Figure 2.)
•
Dryer on the floor with
Conair GasTrac or
HTCs for process heat
connected to hopper(s).
(See Figures 3 and 4.)
Figure 2
Figure 4
(D600-
(continued)