Starting The Dryer - Conair Carousel Plus D Series User Manual

S t a r t i n g t h e D r y e r
To start the dryer:
1
Turn on the main power to the dryer and system components. Check to make sure
that all disconnect dials are in the "ON" position.
2
Fill the drying hopper with material.
3
Enter setpoints as
necessary
5
Press the green start button beside the dryer graphic to start the dryer system.
0
NOTE: The Start and Stop buttons will appear as grey when that function is not available, and bright when it
is available. The grayed buttons mean that the dryer can not be stopped or started at this time. For example,
when the dryer is running, the green button is grayed. The dryer can not be started because it is already run-
ning. Similar conditions may occur during cool down or start up.
ResinWorks configuration Stand alone configuration
O p e r a t i o n l
OFF
O
4 - 5 3