Conair Carousel Plus D Series User Manual page 188

C - 2 6 l A p p e n d i x
D r y i n g H o p p e r M a t e r i a l C h a n g e
What happens when there is a drying hopper material change?
1
Change the process temperature. For example, let's say the process temperature is changed
to 205°F from 225°F. If the DM is being used on a central drying with an HTC or Heater Pack,
the process temperature on that hopper must be changed.
2
If material characteristics require a parameter adjustment, adjust that now. Otherwise,
no further operator action is required.
This graph shows the time sequence of a DM alarm indicating low
hopper air temperature, that could result in improperly dried material.