Typical Applications - Conair Carousel Plus D Series User Manual

0
NOTE: The D600 - 5000 pro-
vides no heat to the delivery
air. A separate heat source is
required at the hopper(s) inlet
to heat the air to the desired
drying temperature.
2 - 2 l D e s c r i p t i o n
W h a t i s t h e C a r o u s e l P l u s D S e r i e s
D r y e r ?
The Carousel Plus D Series Dehumidifying Dryer produces low-dewpoint air that removes
moisture from hygroscopic plastics. The dryer pulls moist air from a drying hopper and cir-
culates it through a dehumidifying desiccant wheel. The dryer then circulates the air through
the material in the hopper.
The dryer's closed-loop design ensures a continuous supply of dehumidified air while pre-
venting contamination from moisture in the plant.
Ty p i c a l A p p l i c a t i o n s
1
Dryer on the floor, single hopper (with delivery air heat
Heater Pack on the hopper or a HTC on a floor stand).
2
Dryer on the floor, multiple hoppers in central
configuration (ResinWorks) with separate heat
source for each hopper.
3
Dryer on the floor, hopper(s) connected to Conair
GasTrac delivery air heater.
The Carousel Plus D Series Dryer can be used successfully in applications that require:
•
A contamination-free drying environment.
•
A constant flow of dehumidified air.
(continued)