Conair Carousel Plus D Series User Manual page 172

C - 1 0 l A p p e n d i x
I n s t a l l i n g t h e P r o b e
CAUTION: Hopper surfaces may be hot. Make sure the drying hopper is empty and has
cooled to room temperature before installing the probe assembly. Failure to do so can
lead to serious injury.
The DM probe is inserted through a hole in the top of the drying hopper and secured to
a threaded coupling with a compression fitting. Mounting adapter plates may be neces-
sary.
There are three mounting methods for the probe:
l
Select Mounting Method 1 if you purchased a new Conair CH series drying hop-
per equipped with a factory-installed coupling for the probe.
l
Select Mounting Method 2 if you are installing the probe and coupling in a drying
hopper that has enough overhead clearance to insert the probe from the top of the
hopper.
l
Select Mounting Method 3 if you are installing the probe and adapter kit on a dry-
ing hopper that does not have enough overhead clearance to insert the probe from
the top.