C l e a n i n g t h e A f t e r c o o l e r C o i l s
You need to clean the aftercooler coils to keep them working efficiently. Cleaning frequency
depends on the type and amount of material you process.
1
Stop the dryer and lockout the main power.
2
Turn off the water flow (close valves) to the
water supply line and return line. Disconnect supply and return lines.
3
Remove the bolts securing the aftercooler cover. Remove the cover.
4
Remove the aftercooler by pulling it out of the aftercooler housing.
D600 - 1000
Models
D1300 - 5000
Models
OFF
O
(continued)
M a i n t e n a n c e l
5 - 9