3D Systems Viper Pro SLA iPro 8000 Quick Start Manual page 76

q u i c k s t a r t g u i d e
Table 1: Message Errors
MESSAGE
MATERIAL
ERROR!
UNKNOWN
MATERIAL
ERROR!
STOP!
INCORRECT
MATERIAL
ERROR!
EMPTY
CONTAINER
ERROR!
76
CAUSE
Resin Not Detected!
Resin Not Recognized!
Resin Container
Installed is Wrong
Type!
RFID Tag Closed!
t r o u b l e s h o o t i n g
ACTION
If the material container is installed, this material
cannot be added into the RDM through the RDM's
on-board delivery system. The resin warranty is
void if material is added manually to the RDM.
This material cannot be added into the RDM
through the RDM's on-board delivery system. The
resin warranty is void if material is added manually
to the RDM.
This RDM contains < >
You are attempting to install < >
This material cannot be added into the RDM
through the RDM's on-board delivery system. The
resin warranty is void if the material is added
manually to the RDM.
All contents of this container have been depleted
from the container and added into the RDM
through the RDM's on-board delivery system. The
resin warranty is void if the material is added
manually to the RDM.