Table of Contents
Advertisement
q u i c k s t a r t g u i d e
r d m i n s t a l l a t i o n a n d r e m o v a l
Figure 6. Container Release Button
6 Lift out the resin container.
7 Using a disposable paper towel, wipe all resin from the container seal assembly.
8 To remove the container, carefully lift it from the container slot, place the vent cap back on,
dispose of the container according to local regulations.
Partially Empty Resin Container Removal
When the resin container is empty and needs additional resin, perform the following procedure. It
is important to verify the type of resin currently in the RDM before proceeding with these steps.
While wearing protective clothing, disposable nitrile gloves, and goggles, perform the following
steps:
25
Advertisement
Table of Contents
