Special Tools
NOTE: Order special tools from the TORO SPECIAL
TOOLS AND APPLICATIONS GUIDE (COMMERCIAL
PRODUCTS) . Some tools may be listed in the Reel
master 216 or Reelmaster 216-D Parts Catalog. Some
tools may also be available from a local supplier.
Handle Assembly (Fig. 1)
For applying lapping compound to cutting units while
keeping hands a safe distance from the rotating reel
assembly.
Bedknife Screw Tool (Fig. 2)
Fits Toro bedknife attaching screws. Use with torque
wrench to secure bedknife to bedbar. With clean bedbar
threads and new screws, tighten to a torque of 200 in-lb.
NOTE: Remove all rust, scale and corrosion from bed
bar surface before installing bedknife.
DO NOT use an air impact wrench with this tool.
®
Reelmaster
216/216-D
Page 9 - 3
Figure 1
Figure 2
Special Tools