Toro Reelmaster 216 Service Manual page 18

REELMASTER® 216-D Maintenance Schedule
Minimum Recommended Maintenance Intervals:
Maintenance Procedure
Inspect Air Filter, Dust Cup, and Baffle
Lubricate All Grease Fittings
† Change Engine Oil
† Check Fan and Alternator Belt Tension
† Change Engine Oil Filter
† Check Traction Belt Tension
Service Air Filter
Replace Fuel Filter/Water Separator
† Replace Hydraulic Filter
† Torque Wheel Lug Nuts
Replace Hydraulic Fluid
Check Battery Level/Connections
Inspect Traction Linkage Movement
‡ Torque Head Bolts and Adjust Valves
‡ Check Engine RPM (idle and full throttle)
† Initial break in at 10 hours
‡ Initial break in at 50 hours
Replace Moving Hoses
Replace Safety Switches
Cooling System - Flush / Replace Fluid
Replace Thermostat
Fuel Tank - Drain/Flush
Hydraulic Tank - Drain/Flush
(See Operator's and Service Manual for specifications and procedures)
Maintenance Interval & Service
Every
Every
100hrs
50hrs
A Level
Service
B Level
Service
Annual Recommendations:
Items listed are recommended every
1000 hours or 2 years whichever occurs
first.
Every
Every
400hrs
200hrs
C Level
Service
D Level
Service