Steering Stop Adjustment - Toro Reelmaster 216 Service Manual

Steering Stop Adjustment (Fig. 4)
To increase or decrease turning radius of machine when
steering wheel is turned fully left or right, adjust steering
stop screws.
1. Loosen locknuts securing stop screws to tabs on
steering sector.
2. Thread stop screws in or out until desired turning
radius is attained.
3. Check adjustment and tighten locknuts.
®
Reelmaster 216/216-D Page 7 - 5
Figure 4
1. Stop screws
2. Steering sector
Adjustments